Compact, easy to install for new or “standby” installations.

Monitron II and Minitron combine the availability and dependability of electricity with the comfort and performance of conventional hydronic heating using baseboard, radiant or cast-iron radiators.

• EM-10 electronic 4 stage boiler control
  The EM-10 boiler temperature control is an efficient boiler operator with a digital LED display with backlight, a boiler pump output and an alarm.
  
  Features:
  • Outdoor reset with DHW priority
  • External control through BMS signal
  • Set point operation
  • And much more

Monitron II and Minitron as a replacement unit: Works with virtually any existing hot water hydronic radiation system. Although rated in kilowatts, it is also clearly identified by BTU output.

Monitron II and Minitron as a standby unit: Particularly suitable for commercial and industrial facilities, or office buildings which can't risk down-time with their existing heating equipment. If oil or gas is temporarily unavailable, the owner easily switches the heating system to the electric boiler.

Monitron II and Minitron as a primary heating unit offers:

• The convenience of electricity and the comfort of hydronics.
• The elimination of a chimney.
• Competitive pricing with electric baseboard systems.
• Simple zoning by zone valves.

Monitron II and Minitron are the electronic-age boilers designed to save energy for new or existing heating systems.

• One piece cast-iron pressure vessel
• Built in air eliminator
• Internal baffles improve heat transfer

Energy saving electronic control.

NORMAL OPERATIONS
When the thermostat calls for heat, the circulator turns on and the first electric heater bank is energized. The circulator continues operating until the room thermostat is satisfied. A flow switch supplied by Slant/Fin or others is required. It prevents the elements from being energized unless the circulator is operating. This avoids element burnout.

OPTIONAL MILD-WEATHER OPERATION
Mild-weather energy savings are made possible through the use of a warm weather shut-down feature of the control. This energy saving feature is standard on Monitron II and Minitron models.

Standard equipment

• Up to 4 stage EM-10 electronic boiler control
• Pressure and temperature gauge
• Safety relief valve (unmounted)
• Circulator relay and heater power relays
• Circuit breaker (one or two heaters per breaker)
• Drain cock, 3/4 " (packed separately)
• Built-in air separator
• Cast-iron ASME approved pressure vessel
• Terminal strips for circulator, thermostat, flow switch, temperature sensors and remote signal input.
• Complete jacketing
• U.L. listed, ASME authorized
• Flow switch. Not included with, but necessary on all models
• Circuit breaker for circulator and control circuit.